-
- chi siamo
-
Products
soluzioni applicative
leggi e notizie
download & utility
listini
contatti
mappa del sito
-
-


Laws & News – Laws on energy saving – Examples of structures

 
 
In this section: -
-
- -

Shown below, for some building structures, are the
thicknesses of Stiferite panels necessary to satisfy the
levels of thermal transmittance (U) contemplated by the modification scheme of Law Decree 192 as from
1/1/2008 and from 1/1/2010.
It is important to remember that a good level of heat
insulation is decisive for a good Class of energy
efficiency of the building.



Investing in insulation therefore means:

  • Saving energy
  • Reducing harmful emissions
  • Enhancing the value of the property



  • Estimate the transmittance of your structure with the automatic calculator


    News in the spotlight
    Aldino Sports Centre (BZ)
    Designer:
         Studio aichner_seidl      ARCHITEKTEN (Brunico, Bz)
    Company:
         Bernard Bau (Montagna, Bz)
    Heat insulation:
         Stiferite Class S e B mm. 200
    Notes:
    The roof was insulated with a layer of 200 mm of Polyiso foam, consisting of two Stiferite panels 100 mm thick (U=0.14 W/m2K).
    Above the vapour barrier, a layer of Stiferite Class S panels was laid, overlapped – with offset joins – by Stiferite Class B panels. This was waterproofed with a double layer of bituminous mantles. Lastly a wood floor of larch planks was laid (fixed to countersloping battens and with planks at a distance of about 5 mm to guarantee the run-off of meteoric waters) which forms the terraced level of the roof.



    Stiferite - Viale della Navigazione Interna, 54 - 35129 Padova (I) - Tel. +39 049 8997911 Fax +39 049 774727
    C.F. - Vat number - Reg. Impr. 03647120280 - R.E.A. PD 325913 - Cap. sociale € 7.737.000