In this section:
1. Stiferite     1.1 Class B     1.2 Class S     1.3 Class SK     1.4 Isoventilato     1.5 BB     1.6 GT     1.7 GTE     1.8 RP     1.9 AI     1.10 AV     1.11 Accoppiati     1.12 Isocanale 2. Stiferene

STIFERITE GTEis an height performance insulation board with a rigid polyisocyanurate polyiso foam core, blowing without CFC or HCFC, coverd on both side with gas diffusion tight facing (aluminium foil).

The GTE panel is indicated for roofs, floors and walls where need vapour proof.

Standard Dimensions mm 600 x 1200
Thicknesses mm 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 120

Specification wording

STIFERITE GT heat insulating panel in rigid Polyiso foam, coated with a
special covered Duotwin.
Thermal insulation STIFERITE GTE in polyiso rigid foam (PIR) of thickness…(*), covered on both sides with gas diffusion tight facing (aluminium foil), has:

Declareted thermal conductivity: λD= 0.023 W/mK (EN 13165 Annessi A e C)
Compressive strength at 10% deformation: minimum value = … kPa (EN 826)
Water vapour diffusion resistance factor: μ > 89900 (EN 12086)
Water vapour diffusion resistance: Z > 13440 m2hPa/mg EN 12086)
Water absorptin by total immersion: WL < 1 % (EN 12087)
Euroclass reaction to fire: E (EN 11925-2)

Product of Company certified according to UNI EN ISO 9001:2000 specifications, with CE conformity mark on the whole range.

Recommended applications

tiles on battens	under plasterboard slabs	ventilated cladding	floors between storeys