|
Indications
The safety mantle allows the building to be protected against
water in a short time, without having to wait for the
completion of the mantle of bent tiles or flat tiles.
In the event of accidental breakages of the latter, it ensures
the necessary waterproofing of the roof, avoiding infiltrations and damage.
From the technical and economic point of view it is one of the most efficacious finishing systems, combining insulation and safety in the best way.
The presence of the vapour barrier is indispensable for the
correct use of the system.
The characteristics of the complementary materials are highlighted only to indicated a good level quality standard
Specification wording
Preparing the foundation
Making the joggle edge.
Fixing the gutter.
With a hot torch, laying a vapour barrier composed of a bituminous membrane with polyester fibre reinforcement, no less than 4 mm thick, with weight no greater than 4 Kg/m2.Vulcanising of the surface layer of the previous membrane with a hot torch.
Safety mantle composed of a slate-finish bituminous membrane weighing 3.5 kg/m2, laid with a hot torch.
Laying the covering of bent tiles or flat tiles, fixing the first rows with mortar, or as many as is necessary, depending on the slope or on possible wind action
Products
Class B |
|
